The duration of a repair depends on the specific issue and the complexity of the job. However, we strive to complete repairs as quickly as possible without compromising quality.

The majority of gate operators and systems have a manual release included to allow for a gate to be opened from its closed position or closed from its opened position in the event of a power failure or malfunction of the automatic gate system.

This is usually accomplished by way of simply pulling a handle or turning a release knob. If you have a gate operator that is protected with some level of security, a key may be required for the door, and it will usually be a hex key or possibly a cut key, or it could possibly be a proprietary type of release key (triangular socket or other) that was provided when the system was installed.

Besides your annual service visit, it is very beneficial to carry out some simple preventative maintenance. Carrying out some small wiggle maintenance measures can greatly prolong the life of your electric gate, intercom, or any of your external electronic systems.

Here are a few important tips for some small check ins:

• Keep the components clean and clear

• Organize regular pest control: Insects also use to build nests inside motor housings, safety beams, actuators, intercoms and keypads. Infestations of insects have been established as one of the leading causes of electrical damage in certain gate systems.

• Occupy the manual release every now and then: We strongly suggest you learn how to operate the manual release on your sliding gate motor or swing gate actuators. You should operate the gate manually every six months to assess them for weight resistance or stiffness or necessarily as per them wear, before genuine issues arise.

When in doubt, call a service technician!!! If you notice any unusual sounds, weight resistance or difficulty of movement, please call to schedule a service prior to electronic issues causing more significant electrical issues and costs.

Several signs to look out for indicate your gate may need attention.

If you notice any unusual sounds such as grinding or scraping when the door is in operation, shaking or vibrating excessively during opening or closing, visual cues like misaligned tracks, frayed cables, or dented panels - this could be a sign of underlying issues.

In order for the gate and motors to operate properly together, they need to be properly aligned with each other, if not it will create stress and ware, which if not resolved will eventually cause permanent damage to the motor and gate.

Misalignment can occur from ground movement due to seasonal changes or improper installation.

Low quality gates tend to loose their structural integrity and may in result have an out of shape gate that literally just does not work.

It is always important to diagnose what the problem is, and where possible rectify the cause rather than living with the symptoms, which may only be a short lived fix.

We offer gate repair services and annual services to keep your gate moving, contact us to book a service for your gate.